- No dyno required
- Easily installed with a few simple tools
- Increase in hp through proper tuning
FITS ALL 2002 through 2007 V-RODS
This unit comes with the preloaded maps for all 2002 through 2007 applications. As most know, anytime that exhaust or air filter changes are made to a fuel injected bike a tune or remap is required to insure that the bike will maintain fuel economy, performance, and most of all engine safety. If these changes are not made you run the risk of having the bike run too lean or too rich which can potentially can cause engine issues. Basically what a fuel manager does is this, the bike comes from the factory with air/fuel mixture settings that were set for stock pipes so when you change the pipes and filter the stock settings do not work well with the new parts. By installing a fuel manager you are basically reconfiguring the bikes fuel system so that it will run the most efficient and maintain an even air/fuel mixture across the rpm range.
The motive behind the development of the fuel manager was to have a plug-and-play unit that could be installed at home in less than one hour. With a majority of fuel managers on the market you are required to take the bike into the dealership and have the unit installed and programmed or tuned. In most cases a Dyno machine is used to program the unit by creating map tables to accommodate the pipes and Hi-Flo air filter. Usually this takes an additional 2 hours which means extra $$$. We wanted a complete exhaust package that is a do-it-yourself installation where you don't have to spend extra money on tuning and installation. Within 2 hours you can have your pipes, air filter, and fuel manager installed and ready to ride. The unit was designed specifically for the TAB Pipes.
The fuel tuner is pre-programed with 10 custom designed maps that were made for all of the TAB Pipes. There is a pot or dial that has 10 settings and you basically turn the dial to the corresponding number that matches you bike and pipes (instructions have the descriptions) and then install the unit. Installation is relatively easy. You basically plug the unit into the bikes 2 fuel injection plugs, install one wire tap, and ground unit to bike. There are very clear and descriptive instructions that contain photos and step by step details that comes with the unit. For those of you who like to tweak your bikes, the unit also has 3 (low-med-high) air/fuel pots that allow you to fine tune your bike.
Download Installation Instructions for 2002-2007 Models
Download Trouble Shooting Guide
This product fits the follow Harley-Davidson models:
Harley-Davidson VRSC V-ROD
VRSCA V-Rod 2002-2006
VRSCAW V-Rod 2007
VRSCB V-Rod 2004-2005
VRSCR Street Rod 2006-2007
VRSCD Night Rod 2006-2007
VRSCDX Night Rod Special 2007
VRSCSE Screamin’ Eagle CVO 2005
VRSCSE2 Screamin’ Eagle CVO 2006
VRSCX Screamin’ Eagle CVO 2007
The name Harley-Davidson ® is a trademark of Harley-Davidson ® and is utilized for reference purpose only, and in no way are they intended to imply any association with Harley-Davidson ®.