|
Indian Folsom Prison Series Handlebars
- 1 design compatible with 2020-Up Challengers and 2018-Up Chieftains (See sub-models below)
- The Widow's Peak design with a black finish is just the beginning!
- The width of the bars has been reduced to provide less strain on your shoulders and back. Also makes cornering and slow manuevers less of a stretch!
- The Interior has been smoothed out to lessen the likelihood of wire snags and damage.
- The 1.5" fatties provide plenty of space for all those wires.
- 5% of sales will be donated to Wheels 4 Warriors USA! A non-profit organization dedicated to helping Veterans two wheels at a time.
Part No: 215-2040, 215-2060, 215-2080
Handlebar Specs:
Height
| Width | Pullback Base | Pullback Rise | Sweep | Clutch, Brake, Switch Wires | +4 (7") / +6 (9") / +8 (11") | 36.5" | 15.5" | 5.25" | 26° | Stock |
Height
- The vertical distance between the centerline of the base bar to the centerline of the grip
*Some manufacturers designate the height of the bar from the highest point of the peek. Ours is measured to the grip.
Width
- The distance from the end of one grip to the end of the other.
Pullback from Base
- The horizontal distance between the centerline of the base bar to the end of the grip.
Pullback from Rise
- The horizontal distance between the centerline of the riser bar to the end of the grip.
Sweep
- The degree of angle between the base bar and the grip.
Challenger Folsom Handlebar Install
Chieftain Handlebar Install
|
|
|