V-ROD Stage 1 Kit
harley-davidson v-rod stage 1 kit

Alternative Views:

Our Price: $840.94

Price with Selected Options: $840.94

Product Code: V-ROD-STAGE-1-KIT

The following items are included FREE with this product:

Please Select Exhaust*:
111-1020 Slash Cut Exhaust
111-1040 Turn Out Exhaust
111-1220 Slash Cut Exhaust (BAFFLED) [Add $40.00]

Please Select Fuel Management*:
Power Vision PV-1B Fits all 2002 - UP V-RODS

Please Select Air Filter*:
HD-1102 K&N 02' - 17' H-D V-ROD Hi Flo Stock Replacement Air Filter
02' - 17' V-ROD Super Intake Machine Finish [Add $437.96]
02' - 17' V-ROD Super Intake Black Anodized [Add $437.96]

Optional S10 Oil Filter:

Description Downloadable Instructions
***The Fuel Manager in This Product Does NOT Conform to C.A.R.B Standards and We Therefore Can NOT Ship This Item to California. If You Place an Order for This Product with a Ship To Address in California, Your Order Will Be Cancelled and Refunded.***

  • 8-12 hp increase over stock
  • 10-15 lbs weight reduction
  • Free hat with purchase of stage 1 kit

Make your V-ROD sound and perform like it should with a Stage 1 Kit from TAB Performance! Kit includes the following:

  1. One set of TAB Performance exhaust of your choice
  2. One Hi-Flo high performance air filter
  3. One fuel management system of your choice
  4. One high performance oil filter (OPTIONAL)
Why stage 1 kit? It comes down to a few very simple realities. The bikes come off the factory running lean, so the tuner will help with performance on its own. The bikes come suppressed on exhaust, so the free flowing exhaust helps with performance on its own. The intake filters are designed for the suppressed exhaust, so once the exhaust is opened up, more intake is needed to take full advantage of your performance exhaust. All three items really work together to ensure you receive full benefit from your purchase.
  • 2002 Harley-Davidson VRSCA V-ROD
  • 2003 Harley-Davidson VRSCA V-ROD
  • 2004 Harley-Davidson VRSCA V-ROD
  • 2004 Harley-Davidson VRSCB V-ROD
  • 2005 Harley-Davidson VRSCA V-ROD
  • 2005 Harley-Davidson VRSCB V-ROD
  • 2005 Harley-Davidson VRSCSE Sreamin' Eagle CVO V-ROD
  • 2006 Harley-Davidson VRSCA V-ROD
  • 2006 Harley-Davidson VRSCSE2 Sreamin' Eagle CVO V-ROD
  • 2007 Harley-Davidson VRSCAW V-ROD
  • 2007 Harley-Davidson VRSCX Screamin' Eagle CVO V-ROD
  • 2007 Harley-Davidson VRXSE Destroyer V-ROD
  • 2008 Harley-Davidson VRSCAW V-ROD
  • 2009 Harley-Davidson VRSCAW V-ROD
  • 2010 Harley-Davidson VRSCAW V-ROD

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 23 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Stage 1 Kit April 1, 2020
Reviewer: Otis Owen from Lynchburg, VA United States  
Purchased the Stage 1 Kit to take my 2002 VRSCA V-Rod and give it some more life. Package came in a timely manner. Everything i needed to complete the job was included, the tuner is very user friendly and then pipes I got were the turn out non baffled man they really wake the sound up of the bike. Very pleased with my purchase.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Tab Performance Stage 1 kit November 12, 2019
Reviewer: Patrick brady from MADISON, AL United States  
I am very satisfied with the stage 1 kit that I received. Everything arrived well packaged and in good time.  Also, most importantly, the kit fit my bike and is of excellent quality.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Good Kit May 7, 2019
Reviewer: Matt from Silverton, OR United States  
The slash cut slip ons with baffles sound great. Installation of kit components was easy. I had to have the ECU on my 2002 VRSCA updated to the latest firmware at the factory (to provide VIN support) before the Power Vision would send a tune to the bike. Once the bike was ready, I spent less than 5 minutes in the dealership parking lot sending a pre-configured tune to the bike before i ride it home.

I had ridden about 200 miles on the bike with slip ons and K&N filter installed (no tune) and the bike was running fine but power and throttle response were highly affected. With the entire kit properly installed, the bike sounds and performs better than before.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Just Right April 27, 2019
Reviewer: Tim from West Creek, NJ United States  
The kit is just right. Quick, easy, and loud!  The hardest part was getting the old mufflers off. The years of rust made it a little challenging. But with some water displacement formula number 40, and a rubber mallet, the pipes came off.

With the new slip-on pipes, I had to aim the turn-out opening down a bit, as it was quite loud.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Exactly what I was after June 19, 2018
Reviewer: Simon Holden from St Peter Port Guernsey, Guernsey United Kingdom  
This kit for a 2003 Centenary VRSCA V-rod was exactly what I was after. I'd always been a bit precious about keeping the whole original set-up but the exhaust note, slightly too fluted (girly) look and snatchy fueling had always niggled at me if I'm honest. I finally got round to doing something about it 15 years after buying the bike and it feels like new again. Much more aggressive stance with the bobbed pipes, an awesome throaty and much deeper exhaust, and more burbled and growl going down the gears and up the revs respectively. It's given the bike real presence again. Turning heads today (2018) as it first did when I first road mine on UK streets in 2003. Pretty chuffed. Good work TAB.

Was this review helpful to you?

View All Customer Reviews