Harley-Davidson Touring Folsom Prison Series Handlebars

• The Widow's Peak design with a black finish is just the beginning!
• The width of the bars has been reduced to provide less strain on your shoulders and back. Also makes cornering and slow manuevers less of a stretch!
• The Interior has been smoothed out to lessen the likelihood of wire snags and damage.
• The 1.5" fatties provide plenty of space for all those wires.
• 5% of sales will be donated to Wheels 4 Warriors USA! A non-profit organization dedicated to helping Veterans two wheels at a time.

---

FLTR Road Glide Specs:

Height	Width	Pullback	Sweep	15-Up Switch Wires	15-20 Clutch/Brake	21-Up Clutch/Brake
12"	35.25"	5"	25°	Stock	Stock	Stock
14"	35.25"	5"	25°	NHCX-CB14*	FB Kit 109314*	FB Kit 109914
16"	35.25"	5"	25°	NHCX-CB14	FB Kit 109314*	FB Kit 109916

*Fat Bagger Extension Kits for Road Glides do not include switch wire extensions. These must be purchased separately.
*The NAMZ switch wire extensions (NHCX-CB14) are recommended for 14" but not required.
*FB Kit 109314 for 15-20 Road Glide models must be purchased directly from Fat Baggers.

FLH Street Glide Specs:

Height	Width	Pullback Base	Pullback Rise	Sweep	14-20 Switch Wires	21-Up Switch Wires	14-20 Clutch/Brake	21-Up Clutch/Brake
12"	37"	11.25"	6.75"	35°	NHCX-CB14	Included in clutch/brake kit	Stock	FB Kit 109012
14"	37"	11.25"	6.75"	35°	Included in clutch/brake kit	Included in clutch/brake kit	FB Kit 109214*	FB Kit 109014
16"	37"	11.25"	6.75"	35°	Included in clutch/brake kit	Included in clutch/brake kit	FB Kit 109214*	FB Kit 109016

*FB Kit 109214 for 14-20 Street/Electra/Ultra Glides models must be purchased directly from Fat Baggers.

---

Height

• The distance between the centerline of the base bar to the centerline of the grip

*Some manufacturers designate the height of the bar from the highest point of the peek. Ours is measured to the grip.

Width

• The distance from the end of one grip to the end of the other.

Pullback from Base

• The distance between the centerline of the base bar to the end of the grip.

Pullback from Rise

• The distance between the centerline of the riser bar to the end of the grip.

*The base bar and the riser bar on the Road Glide handlebars are on the same plane so the pullback measurements are the same.

Sweep

• The degree of angle between the base bar and the grip.