• 8-12 hp increase over stock exhaust*
• 15-20 lbs lighter than stock exhaust
• Installs in minutes using a few simple tools

These pipes have a great deep, throaty tone that are much louder than the stock exhaust. As far as volume goes, we rate them a 10 on a 1-10 scale as they are just slightly quieter than straight pipes. These pipes are as awesome looking as they are sounding, always generating compliments! The top pipe is approximately 16 inches and the bottom 12 inches giving your V-ROD that aggressive look. TAB Performance pipes are designed to be easily installed by yourself and can put on and ready to go in about 15 minutes - including taking off your factory pipes using only a few simple tools. TAB pipes require no additional hardware for installation and use your factory pipe clamps.

As with any exhaust changes that you make to your bike there will be a difference in back pressure which requires an air/fuel mixture correction to ensure the peak performance of your engine and prevent possible damage. TAB Performance offers several solutions including our Auto Tuner and Fuel Manager. TAB Performance is not responsible nor held liable for any damage caused to the motorcycle due to not making proper fuel system changes.

Exhaust clamps pictured are Harley-Davidson aftermarket part number: 65271-03 and are NOT included with the exhaust.

Do I Need a Fuel Manager?

* Horse Power increase based on SAE smoothing (more conservative than STD) and properly tuned bikes

Blueing and/or discoloration is not covered under warranty, it is a result of improper tuning,cam timing, engine timing, jetting, overheating etc. It is not caused by defective manufacturing.The mufflers and components offered may not meet EPA emissions and noise guidelines and may be restricted to off-road use only. The name Harley-Davidson ® are trademarks of Harley-Davidson ® and is utilized for reference purpose only, and in no way are they intended to imply any association with Harley-Davidson ®.