Indian Folsom Prison Series Handlebars
See below for specs compared to the stock handlebar.
- 1 design compatible with Challengers, Pursuits and 18-up Chieftains and Roadmasters.
- The Interior has been smoothed out to lessen the likelihood of wire snags and damage.
- The 1.5" fatties provide plenty of space for all those wires.
- We allocate 5% of our sales to support veteran organizations that are committed to transforming the lives of veterans.
Handlebar Specs:
Bar*
| Height** | Width | Pullback | Sweep | Clutch, Brake, Wire Req | Stock
| 3" | 33.25" | 15.5"
| | Stock | | +4 | 7" | 36.5" | 15.5" | 26° | Stock | | +6 | 9" | 36.5" | 15.5" | 26° | Stock**** | | +8 | 11" | 36.5" | 15.5" | 26° | Stock**** |
| | | | |
|
*The bar designation (+4, +6, +8) is how much higher the grips are than stock.
**The height is measured with the bars installed at 25°.
***RR +4 is our reduced reach bar which has 2 more inches of pullback if you want the bars closer. They can be found here.
***+6 & +8 Requires extended clutch cable for the 2025-Up Chieftain/Roadmaster PowerPlus models. Indian Part Number 2891283
Height
- The vertical distance between the centerline of the base bar to the centerline of the grip
*Some manufacturers designate the height of the bar from the highest point of the peek. Ours is measured to the grip.
Width
- The distance from the end of one grip to the end of the other.
Pullback
- The horizontal distance between the centerline of the base bar to the end of the grip.
Sweep
- The degree of angle between the base bar and the grip.
Looking for Chrome? Click Here
Product Nos:
215-2040
215-2060
215-2080
Challenger Folsom Handlebar Install
Chieftain Handlebar Install
Folsom Prison Bar Comparison
Fits all 2018 - Up Indian Bagger & Touring Models
Roadmaster - all sub models/packages
Chieftain - all sub models/packages
Challenger - all sub models/packages
Pursuit - all sub models/packages
|
TAB bars on 2025 Pursuit 
