 |
Harley-Davidson Touring/Softail Folsom Prison Series Handlebars (with 1.25" Clamping Area)
The Folsom Prison FlexFitment Handlebars with a 1.25" clamping area were
originally built with one bike in mind, but it turns out they fit a whole
family of models just as perfectly—hence the name "FlexFitment."
Combining rugged style, lasting durability, and rider-focused functionality,
these handlebars are tailor-made for anyone looking to upgrade their Harley
without the headache. Whether you’re carving through curves or stealing the
show at a bike meet, these bars deliver comfort, performance, and a bold aesthetic
that turns heads.
Fitment Compatibility:- Touring Models: Compatible with 2015-Up Road Glides, 2023-Up Road Glide 3, 2015-2017 CVO Road Glides, 2022-2023 CVO Road Glide Limited, and 2017-Up Road King Special.
- Softail Models: Fits any Harley-Davidson Softail with a 1.25" clamping area.
Key Features:
- Widow's Peak Design: A bold, black
finish that adds a striking and aggressive edge to your ride.
- Powder-Coated
Durability: Protected
from tip to tip with a powder-coated finish for unbeatable rust resistance
and longevity.
- Made in the USA: Proudly crafted in
America with top-notch quality you can trust.
- Optimized Comfort: Reduced width
takes the strain off your shoulders and back, making tight corners and
slow maneuvers much easier.
- Wire-Friendly Interior: Smoothed internal
surfaces reduce the chance of snags and make wire installation
hassle-free.
- 1.5" Fatties: Ample space for
all your handlebar wiring needs to ensure a clean and seamless setup.
Every purchase supports a good cause, as 5% of sales go to
veteran organizations dedicated to making a positive impact in the lives of
those who’ve served.
Upgrade your Harley-Davidson with the Folsom Prison
1.25" FlexFitment Handlebars and experience the perfect fusion of style
and functionality. From unmatched versatility to rugged dependability, these
bars are built to exceed your expectations and keep you riding in bold,
unapologetic style. Specs:Height | Width | Pullback | Sweep | 15-Up Switch Wires | 15-20 Clutch/Brake | 21-Up Clutch/Brake | 12" | 35.25" | 5" | 25° | Stock | Stock | Stock | 14" | 35.25" | 5" | 25° | NHCX-CB14* | FB Kit 109314* | FB Kit 109914 | 16" | 35.25" | 5" | 25° | NHCX-CB14 | FB Kit 109314* | FB Kit 109916 |
*Fat Bagger Extension Kits for Road Glides do not include switch wire extensions. These must be purchased separately. *The NAMZ switch wire extensions (NHCX-CB14) are recommended for 14" but not required. *FB Kit 109314 for 15-20 Road Glide models must be purchased directly from Fat Baggers.
Height
- The distance between the centerline of the base bar to the centerline of the grip
*Some manufacturers designate the height of the bar from the highest point of the peek. Ours is measured to the grip.
Width
- The distance from the end of one grip to the end of the other.
Pullback from Base
- The distance between the centerline of the base bar to the end of the grip.
Pullback from Rise
- The distance between the centerline of the riser bar to the end of the grip.
*The base bar and the riser bar on the Road Glide handlebars are on the same plane so the pullback measurements are the same.
Sweep
- The degree of angle between the base bar and the grip.
Product Nos: 125-2121 125-2141 125-2161 125-2123 125-2143 125-2163
|
|
 |