Home > HARLEY-DAVIDSON > HD Headers (Race Use Only) > 2-2 Headers >

2-into-2 Fully Shielded Headers

TAB Performance 2-into-2 exhaust head pipe for a harley-davidson touring fl bagger
 
Alternative Views:


Our Price: $799.95

Price with Selected Options: $799.95


Free Shipping
Availability:: Usually Ships in 24 Hours
Product Code: 2017-UP-H-D-2-2-FULL-HEAD-PIPE


Please Select Heat Shield Finish*:
Chrome
Black [Add $50.00]

Qty:  
Description
 
  • 100% Manufactured in the USA
  • Includes heat shields for easy installation
  • Includes full round cross over for maximum flow and performance
  • Choice of black or chrome
  • Can be used with any stock fitment bagger slip-on mufflers
  • Includes 18mm and 12mm O2 Sensor Bungs (placed for easy on bike tuning)
  • Includes 18mm and 12mm Bung Plugs
  • Includes exhaust port gasket replacements
  • Made from high quality chrome plated steel
  • Does NOT contain a catalyst and is not legal for road use
  • Limited Lifetime Warranty
If you're looking for a great 2-into-2 fully shielded header, at a great price this is the one for you. These headers do not need any spacers and will snug right up to the bike following the stock line leaving you with a nice streamlined head pipe that performs as good as it sounds while giving you maximum distance between your leg and the pipe resulting in maximum rider comfort. Our front and rear balancing chamber has been designed to maximize balance and flow to ensure that you are left with a maximum amount of torque and horsepower.

These pipes can be installed at home with nothing more than a basic tool set and ready for rider enjoyment in as little as 60 minutes. This is truly a great product and provides great value to anyone looking to upgrade their race build.

Part Numbers
Chrome: 123-1203
Black: 123-2203


***This product does NOT conform to C.A.R.B Standards and we therefor can NOT ship this item to California. If you place an order for this product with a ship-to-address in California, your order will be cancelled and refunded.

This product is a RACE USE ONLY product and should not be installed on a bike used for road transport. If you purchase this, you are stating that you are using this as a race product not to be used on the road. Our terms and conditions box at checkout will require you to accept this before checking out.***


The headers and components offered does not meet EPA emissions and noise guidelines and is restricted to off-road use only. The name Harley-Davidson® are trademarks of Harley-Davidson® and is utilized for reference purpose only, and in no way are they intended to imply any association with Harley-Davidson®.

Which Header Style is Right for You?
"How To" - Install Video
Fitment
  • These pipes will fit the following Harley-Davidson FL Touring 2017-Up FLHT, FLHX, FLHR, and FLTR Race Builds:

    Electra Glide Standard
    Electra Glide Revival
    Road King
    Road King Special
    Street Glide
    Street Glide Special
    Street Glide ST
    CVO Street Glide
    Road Glide
    Road Glide Special
    Road Glide ST
    Road Glide Ultra
    CVO Road Glide
    Electra Glide Ultra Classic
    Ultra Limited
    Ultra Limited Low
    CVO Limited
    Does NOT fit Trike Models

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 103 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 2-into-2 Fully Shielded Headers April 9, 2025
Reviewer: Kevin Golden from North Smithfield, RI United States  
I'm in the Northeast, so riding hasn't been much of an option lately. I had a few upgrades done and the 2 into 2's were part of it. Just the ride back from my mechanic back to the house was incredible. Infinitely better than stock! Looking forward to getting out on the highway to really cut it loose!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 2 into 2 Header March 1, 2025
Reviewer: Tony Morris from Oklahoma  
Purchased May 11, 2023. The headers are great! However the shielding needs some serious re-thinking on mounting. Thus far I've had to replace both lower and upper shields due to the tabs where the clamps going through breaking. And I'm getting ready to have to replace the upper shield again. Harley Davidsons Vibrate Alot! ( especially if you have a cam and headers on it), not to mention, that depending on the area of the country one lives in and it's cities inabilities to smooth out roads also contributes to the breaking of those tabs. Wish I were a engineer or had some advise on what way to better this problem. But I don't.  Like I said the headers work wonderfully and put o ut good flow.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 26, 2024
Reviewer: William Taylor from SARASOTA, FL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 October 14, 2024
Reviewer: Jaddan Schwarz from Sparta, WI United States  
Sounds great

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Execelent product August 26, 2024
Reviewer: Bryan Mueller from Macon, GA United States  
The product is nice once installed the design of the mid pipe bracket could use some re design anlong with where it bolts under the transmission cover both mounting points are aggrivating to deal with but once installed it wakes the bike up in my opinion

Was this review helpful to you?

View All Customer Reviews