Folsom Prison Handlebars Road Glide/Road Glide 3
Harley-Davidson Touring Folsom Prison Series Handlebars
- The Widow's Peak design with a black finish is just the beginning!
- The width of the bars has been reduced to provide less strain on your shoulders and back. Also makes cornering and slow manuevers less of a stretch!
- The Interior has been smoothed out to lessen the likelihood of wire snags and damage.
- The 1.5" fatties provide plenty of space for all those wires.
- 5% of sales will be donated to Wheels 4 Warriors USA! A non-profit organization dedicated to helping Veterans two wheels at a time.
- Will not fit 2023 CVO Road Glides or 2024 Models
Road Glide Specs:Height | Width | Pullback | Sweep | 15-Up Switch Wires | 15-20 Clutch/Brake | 21-Up Clutch/Brake |
12" | 35.25" | 5" | 25° | Stock | Stock | Stock |
14" | 35.25" | 5" | 25° | NHCX-CB14* | FB Kit 109314* | FB Kit 109914 |
16" | 35.25" | 5" | 25° | NHCX-CB14 | FB Kit 109314* | FB Kit 109916 |
*
Fat Bagger Extension Kits for Road Glides do not include switch wire extensions. These must be purchased separately.*The NAMZ switch wire extensions (
NHCX-CB14) are recommended for 14" but not required.
*
FB Kit 109314 for 15-20 Road Glide models must be purchased directly from Fat Baggers.
Height- The distance between the centerline of the base bar to the centerline of the grip
*Some manufacturers designate the height of the bar from the highest point of the peek. Ours is measured to the grip.
Width- The distance from the end of one grip to the end of the other.
Pullback from Base- The distance between the centerline of the base bar to the end of the grip.
Pullback from Rise- The distance between the centerline of the riser bar to the end of the grip.
*The base bar and the riser bar on the Road Glide handlebars are on the same plane so the pullback measurements are the same.
Sweep- The degree of angle between the base bar and the grip.
Product Nos:
125-2121
125-2141
125-2161
(4)